Diezel Herbert Pedal

Diezel Herbert Pedal

Not rated yet
0

Diezel Herbert Pedal

  • $299.99USD
en rupture de stock - veuillez svp nous contacter pour les informations sur la disponibilité

No amp embodies the power and signature roar of Diezel Amplification like the 180-watt Herbert. And with the Herbert Pedal, that same searing gain, punishingly tight low end, and finely tuned midrange fits on your pedal board.

This high-gain stomp replicates its namesake amp’s preamp with precision. You’ll find the same wide-ranging EQ control and foot-switchable Midcut circuit, along with Presence and Deep controls for mimicking the amplifier’s power-section punch.

To make this stompbox-sized preamp even more flexible, we included a separate output for running directly into a power amplifier, using the Herbert Pedal as your rig’s front end. And you can control it all remotely, thanks to its 1/4" stereo jack.

If you want to add the savage sounds of Diezel’s Herbert to your setup, but don’t need to harness the power of the full head, the Herbert Pedal is your high-gain sonic solution.

Sculpt your aggression
Anyone who has had the experience of dialing in a Diezel Herbert knows how finely tuned its EQ section is. And that’s exactly what you get in the Herbert Pedal. Its 3-band EQ combines with a switchable Midcut circuit to craft anything from cutting aggression to a ground-shaking scooped sound.

Gain control travels from rock ‘n’ roll to the most dominating metal tones
Tonal shaping courtesy of a 3-band EQ
Foot-switchable Midcut circuit precisely shapes the amp’s mid frequencies
Presence and Deep knobs add sub-frequency punch and clarity to taste
   
Preamp or stompbox, your choice
Far from just another distortion pedal, the Diezel Herbert pedal offers multiple ways to achieve its ground-shaking tones. If you prefer using pedals for your dirt, you’ll find the pedal works beautifully straight into the front of your clean amp. But you’ll also find a dedicated “To Power Amp In” output jack that turns the pedal into a fully functional preamp. Plug it into the series effects loop return of any guitar amp or directly into a stand-alone power amp, and you’ve turned your amp into your very own Diezel Herbert - perfect for players who often have to rely on less-than-dependable rental backlines.

Two ways to achieve the Diezel tone
Works as either an overdrive effect or as a stand-alone preamp
Independent “To Power Amp In” output is finely tuned for power amps or series effects loop inputs  
When used as a preamp, the Bypass switch mutes your signal

Technical
Preamp pedal based on the Diezel Herbert
Foot-switchable Midcut circuit
Controls: Normal Master, Midcut Master, Midcut Intensity, Gain, Bass, Middle, Treble, Presence, and Deep
Pedal can be powered between 12-18VDC (no battery)
12V power supply included
18V power supply cable included (for use with 9V isolated power supplies)

    • Poids ou poids dimensionelle pour calcul de transport
      2.5 lbs
    • UGS
      HerbertPd
Il n'y a pas encore des commentaires, Soyez le premier a nous laisser un commentaire